D Beam; Ambience; Effects; Control Knob - Roland HandSonic 10 Owner's Manual

Getting Familiar
KIT Buton

Control Knob

D BEAM

Now pass your hand over the D Beam. Here you are simply triggering a sound with it.
Make sure the [D BEAM] button is lit.

Ambience

Next, while holding down the [SHIFT] button, press the [EFFECT] button. This is how you turn the Ambience
on or off, and you will see the indication in the display.

Effects

Press the [SFX] kit button (#5). Play the pads and D Beam. Press the [EFFECT] button to hear the difference.
Control Knob
TUNING:
MUFFLING:
EFFECT:
* If you make any of the above adjustments while in a User Kit (1–64), those changes will be written. You
can undo them however. (see page 23)
Press the [KIT] button and try out some of the 64 user kits.
8
D BEAM Button
EFFECT Button
Press the [STEEL DRUM] kit button (#3). Now, push the Control Knob, LED
next to TUNING will light. Tap any pad, and turn the control knob. This is
a quick way to tune the sounds.
Press the Control Knob and the LED next to MUFFLING will light. Tap any
pad and turn the Control knob.
Press the Control knob and the LED next to EFFECT will light. Tap any pad
and turn the Control knob. In this case, you are changing a parameter in
the Effects assigned to this kit.
D BEAM Controller
Preset KIT Buttons
SHIFT Button