Hydraulic System Test Ports - Toro Reelmaster 5410-D Operator's Manual

WARNING
Hydraulic fluid escaping under pressure can
penetrate skin and cause injury.
• Make sure all hydraulic fluid hoses and
lines are in good condition and all hydraulic
connections and fittings are tight before
applying pressure to the hydraulic system.
• Keep your body and hands away from
pin hole leaks or nozzles that eject high
pressure hydraulic fluid.
• Use cardboard or paper to find hydraulic
leaks.
• Safely relieve all pressure in the hydraulic
system before performing any work on the
hydraulic system.
• Get immediate medical help if fluid is
injected into skin.
Hydraulic System Test
Ports
Use the hydraulic system test ports to test the
pressure in the hydraulic circuits. Contact your local
Toro distributor for assistance.
Use the test ports on the front hydraulic tubes
90) to assist in troubleshooting the traction circuit.
Figure 90
1. Traction circuit test port
Use the test ports on the mow manifold block
91) to assist in troubleshooting the mow circuit.
1. Mow circuit test ports (2)
Use the test port on the lift manifold block
to assist in troubleshooting the lift circuit.
(Figure
1. Lift circuit test port
g003982
(Figure
56
Figure 91
(Figure
Figure 92
g021221
92)
g003983