Configuring The Hdmi Settings; Setting The Use Of Hdmi Control; Setting The Output Of Hdmi Audio From The Tv Speaker; Setting The Use Of Hdmi Standby Through - Yamaha RX-V385 Owner's Manual

Configuring the HDMI settings

Setting the use of HDMI Control

Enables/disables HDMI Control. HDMI Control allows you to operate external devices
via HDMI.
Setup menu
"HDMI" > "HDMI Control"
Settings
Off Disables HDMI Control.
Enables HDMI Control.
On
Configure the settings in "TV Audio Input", "Standby Sync", "ARC", and
"SCENE".
Note
To use HDMI control, you need to perform the HDMI Control link setup after connecting HDMI Control-
compatible devices. For details, see the following:
▪ "HDMI Control and synchronized operations" (p.102)
Setting the output of HDMI audio from the TV
speaker
Enables/disables audio output from a TV connected to the HDMI OUT jack when
"HDMI Control" is set to "Off".
Note
For details on "HDMI Control" in the "Setup" menu, see the following:
▪ "Setting the use of HDMI Control" (p.72)
Setup menu
"HDMI" > "Audio Output"
Settings
Off Disables audio output from the TV.
On Enables audio output from the TV.

Setting the use of HDMI Standby Through

Select whether to output video/audio (input through HDMI jacks) to the TV when the
unit is in standby mode.
Note
If this function is set to "On" or "Auto", you can use the input selection keys (HDMI 1–4) to select an HDMI
input even when the unit is in standby mode (the standby indicator on the unit blinks).
Setup menu
"HDMI" > "Standby Through"
Settings
Off Does not output video/audio to the TV.
Automatically selects whether to output video/audio depending on the
Auto
status of the connected device.
Outputs video/audio to the TV.
On
(The unit consumes more power than when "Off" or "Auto" is selected.)
Note
▪ "Off" is not selectable when "HDMI Control" is set to "On".
▪ For details on "HDMI Control" in the "Setup" menu, see the following:
– "Setting the use of HDMI Control" (p.72)
Setting the use of 4K upscaling of the HDMI video
signal
Enables/disables the upscaling function. When it is enabled, 1080p content is
displayed at 4K resolution.
Setup menu
"HDMI" > "4K Upscaling"
Settings
Off Disables the upscaling function.
On Enables the upscaling function.
72
En