Change from a Lost GPS Source
If the control head cannot detect the set GPS receiver, the control head will display an error message so that you can reset the GPS
source as follows:
• If the shared GPS receiver is not detected, the control head will switch automatically to the local GPS receiver (internal or
connected to the control head). Follow the on-screen instructions to save the local GPS receiver as the selected source.
• If the local GPS receiver is not detected, the GPS data will flash. If there isn't data displayed in the digital readout box, the source
has been lost. See Select a GPS Source to select another GPS receiver in the network.
GPS Source & Sharing Waypoints
Finding the GPS Source (700 Series HD)
GPS Source Lost (HELIX Series)
If you switch to a Local source, you are selecting the internal GPS.
30