Open The Network Source Setup Dialog Box - Humminbird 1100CI Series Installation And Operation Manual

O N
PEN THE ETWORK
The Network Source Setup dialog box displays all the sources connected to the network. The sources may be shared on the network
or operating locally with their connected control head.

Open the Network Source Setup Dialog Box

1. Main Menu: Press the MENU key twice. Select the Network tab.
2. Select Network Source Setup. Press the RIGHT Cursor key.
Status Tab: Review the status tab to see all detected sources in the network. If a source is grayed out, the source is detected,
but the connection is lost or unavailable.
Select a Source: Review each source section in this manual to select a data source for each control head and understand how
a shared source will affect your control head.
CHIRP Models: A CHIRP unit can use sources from any other control heads on the network. If a unit is not CHIRP-capable, it
cannot use sources connected to the CHIRP control head (unless CHIRP Mode is turned off). See Set up Sonar for details.
and accessories
S S
OURCE ETUP
Network Source Setup Dialog Box (700 Series HD)
status tab
temperature
sources from
transducers
GPS source
D B
IALOG OX
source name
15
source tabs
Grayed-out Source:
The transducer source
connection is lost.
If the Unit Name is
changed, the new name
will be displayed here. See
Customize the Unit Name.
Open the Network Source Setup Dialog Box