Storing The Instrument; Maintenance And Inspection; Disposal Method; About This Manual - Konica Minolta CA-410 Series Instruction Manual

Storing the Instrument

• This instrument should be stored at a temperature between 0 and 45°C with a relative humidity of 85% or less and no
condensation. Storing the instrument in an environment with high temperatures and high humidity will result in
unsatisfactory performance. Storing the instrument at or near room temperature and humidity is recommended.
• Make sure that the instrument is not subjected to condensation when stored. In addition, take care to prevent rapid
temperature changes to prevent condensation from occurring when transporting the instrument to the storage location.
• Storing the instrument in direct sunlight or near heating equipment can cause the internal temperature of the instrument
to become much higher than the ambient temperature, resulting in malfunction. Do not store the instrument in such
areas.
• Do not store the instrument in areas where dust, smoke, or chemical gases are present. Doing so may cause deterioration
in performance or a malfunction.
• Do not leave the instrument inside the cab or trunk of a vehicle. Otherwise, the temperature and/or humidity during
midsummer or midwinter may exceed the allowable range for storage, resulting in a malfunction.
• Before storing, make sure that the lens is attached with the cap supplied as a standard accessory.
Notes on Cleaning
• If the instrument becomes dirty, wipe it with a soft, dry cloth. Never use organic solvents (such as benzene or thinner) or
other chemicals for cleaning.
• If there is dust or dirt on the optical system of a probe, use a blower to blow it off and then gently wipe it with a soft, dry
cloth or with a lens-cleaning cloth. Never use organic solvents (such as benzene or thinner) or other chemicals for
cleaning.
• If you are unable to remove dirt from the instrument or if the instrument becomes scratched, contact a KONICA
MINOLTAauthorized service facility.
Notes on Transporting
• When transporting the instrument, be sure to use the packing materials to minimize shock or vibration.
• When sending the instrument in for service, package and send the instrument and all accessories.

Maintenance and Inspection

• To maintain measurement accuracy, the instrument should be inspected once a year. For information on inspection,
contact the nearest KONICA MINOLTA-authorized service facility.

Disposal Method

• Make sure that the instrument, its accessories, and the packing materials are either disposed of or recycled correctly in
accordance with local laws and regulations.

About This Manual

This manual is designed for those who possess basic knowledge of displays and relevant equipment.
Please read this manual carefully before using the instrument.
In the descriptions about probes in this manual, probes are described as "probe" where the type of probe is not specified.
For Those Who Want to Purchase Optional Accessories for This Instrument
This manual also explains how to use optional accessories available for this instrument.
If an explanation of how to use an optional accessory is given in this manual, its product name is also given.
Please read the explanation together with the manual supplied with the accessory.
3