Table of Contents
Advertisement
Input
2
Service
.05
In the service menu the states of the digital and analogue inputs are displayed. The outputs
can be set and reset manually. In addition functions for adjusting the drives, the sensors and
the edge guide can be called up, and information about the status of software and fi rmware
displayed.
Only the supervisor and administrator have access to the service menu.
● Log-in as administrator or supervisor.
● Select the "tools" function.
● Call up the service menu.
Industrial
Descriptions of the functions in the service menu
Inputs/outputs
After this function has been selected, the machine's inputs are displayed. Outputs can set
and reset manually. The pedal function can be checked.
Drives
After this function has been selected, the motor functions can be checked and the value for
the motor reference position altered.
Feed regulator confi guration
After this function has been selected, the feed regulator can be confi gured.
Edge guide on/off
After this function has been selected, the adjustment function of the edge guide can be
switched on or off.
Sensors
After this function has been selected, the current value for the thread strength is displayed.
Adjustment to the thread strength and bobbin thread recognition can be made.
29
Advertisement
Table of Contents
