Table of Contents
Advertisement
Adjustment
15
Service menu
.14
The service functions provide assistance during troubleshooting and commissioning. After
calling up the input mode using the TE/Speed key, call up the menu for selecting the service
functions by pressing the F1 key if you have the appropriate authorisation (access level G or
C). The status text "Service" appears in the display after calling up the service functions.
O Switch the machine on.
O Press the TE/Speed key to call up the input mode.
O Press the F1 key within 5 seconds to call up the service functions.
FCT
The individual service functions are displayed under "FCT" and can be selected using the
corresponding +/- key.
Overview of the service functions
46
No
FKT
X05
01
IN
P01
FCT
Explanation
IN
Read inputs
The number of the input "No" can be selected using the corresponding +/- key.
OUT
Set/reset outputs
The number of the output "No" can be selected and set accordingly "VAL " (ON/
OFF) using the corresponding +/- keys.
PED
Read pedal nominal value transmitter
POS
Read main drive position
SM1
Move stepping motor SM1 (edge guide)
Positions the edge guide in the position entered by selecting the type "POS" and
entering the desired value using the corresponding +/- keys. The edge guide is
moved to the reference position by selecting the type "REF" and confirming the
selection using the corresponding +/- keys.
SERVICE
VAL
OFF
Advertisement
Table of Contents
