Changing The Keyboard's Split Point Ou; Changing The Volume Balance In Dual Play Occ Cceceeseesessesseseseeeseeeeacseencacseseeseeueaesasseenesneneeneneens; Disabling The Beat Indicator's Pulsations Occ; Ecseseestecvecneesnececsneccnesassanesecseecateeneeueeareeneenss - Roland HP 337 Owner's Manual

Changing Various Settings
Changing the Keyboard's
Split Point
When in Split mode, you can move the keyboard's split point
to any key from Bi to B6. "F#3" is the power-on default for
the split point.
F#3 (Split Point)
5
1. While pressing the [Split] button, press one of the
keys on the keyboard.
The pressed key becomes the split point.
7
-|
The split point can also be changed using the following two
methods.
Method 1
1. While holding down the [Split] button, press the
Variation [+] or [-] button.
Pressing the [+] button once moves the split point one
key to the upper; pressing the [-] button once moves the
split point one key to the lower.
Pressing both the [+] and [-] buttons simultancously sets
it to "FHS."
Method 2
]. Press the [Function] button.
The [Function] button's indicator blinks.
2. Press the [Split] button.
3. Using the Variation [+] and [-] buttons, change
the split point.
4. Press the [Function] button.
The [Function] button's indicator goes out.
See "Playing Different Tones with the Left and
Right Hands (Split Play)" (p. 19).
Changing the Volume
Balance in Dual Play
You can change the volume balance between the two layered
sounds in Dual Play.
"5-5" is the power-on default for the balance (left-side button
volume/right-side button volume).
1. Hold down the [Key Touch] button while you
press the Variation [+] or [-] button to adjust the
volume balance.
|
The volume balance can also be adjusted by the following
method.
1. Press the [Function] button.
The [Function] button's indicator blinks.
2. Press the [Key Touch] button.
3. Using the Variation [+] and [-] buttons, adjust the
volume balance.
4. Press the [Function] button.
The [Function] button's indicator goes out.
"Layering Two Instrument Sounds (Dual
Play)" (p. 18)
Disabling the Beat
Indicator's Pulsations
Perform the steps below to get the beat indicator to stop
blinking on and off. The setting is at "ON" when the HP 337
is powered up.
1. Press the [Function] button.
The [Function] button's indicator blinks.
2. Press the Metronome [Sound] button.
3. Using the Variation [+] and [-] buttons, toggle
between ON and OFF.
4, Press the [Function] button.
The [Function] button's indicator goes out.
48