Installation Instructions; Specifications - Rinnai RIN250EHP Installation And Owner's Manual

Regulatory Requirements
This water heater must be installed
by a licensed tradesperson, and in
accordance with:
• AS/NZS3500.4.2 "National
Plumbing and Drainage Code Hot
Water Supply Systems – Acceptable
Solutions".
• AS/NZS3000.
• Local authority regulations.
• Outside Australia and New Zealand,
please refer to local plumbing and
building codes and regulations.
• Notice to Victorian customers from
the Victorian Plumbing Industry
Commission – this water heater must
be installed by a licensed person as
required by the Victorian Building Act
(1993). Only a licensed person will give
you a compliance certificate, showing
that the work complies with all the
relevant Standards and only a licensed
person will have insurance protecting
their workmanship for 6 years.
Note: This water heater and
heat pump components are
not suitable for pool heating.

Specifications

The net weight of the heat pump is
107kg.
Dimensions are shown in the rough in
diagram in this manual.
H4123 025961

Installation Instructions

Rev. A July 2012
Installation and Owner's Manual – Heat Pump
3