Hardware Description; Front Panel - Planet GSW-1820VHP User Manual

2. Hardware Description

These switches provide three different running speeds – 10Mbps, 100Mbps and
1000Mbps and automatically distinguish the speed of the incoming connection.
This section describes the hardware features of 802.3at PoE+ Switch. For easier
management and control of the 802.3at PoE+ Switch, familiarize yourself with its
display indicators and ports. Front panel illustrations in this chapter display the unit
LED indicators. Before connecting any network device to the 802.3at PoE+ Switch,
please read this chapter carefully.

2.1 Front Panel

The Front Panel of the 802.3at PoE+ Switch consists of 16/24 802.3af/at auto-
sensing 10/100/1000Mbps Ethernet RJ45 ports and 2 Gigabit SFP ports. The LCD
monitor and LED Indicators are also located on the front panel of the 802.3at
PoE+ Switch.
Menu (5 sec) Up
Enter
Back Down PWR
Menu (5 sec) Up
Enter
Back Down
PWR
„ Gigabit TP Interface
10/100/1000BASE-T copper, RJ45 twisted-pair: Up to 100 meter.
„ Gigabit SFP Slots
1000BASE-SX/LX mini-GBIC slot, SFP (Small Factor Pluggable) transceiver
module: From 550 meters (multi-mode fiber) to 10/20/30/40/50/60/70/120 kilo-
meters (single-mode fiber).
„ Smart LCD
The Smart LCD that is located on the front panel of the GSW-1820VHP, GSW-
2620VHP 802.3at PoE+ Switch provides "PoE Management and Status",
"Switch Mode: Standard, VLAN, Extend", "Budget and Bandwidth
Control", "Screen Saver", "Fan Control", and "Factory Default".
14
2
GSW-1820VHP
2 4 6 8 10 12 14 16
PoE
SFP
LNK
1 3 5 7 9 11 13 15 17 18 ACT
PoE
1000 LNK ACT PoE In-Use
1
10/100 LNK ACT
Figure 2-1: GSW-1820VHP Switch Front Panel
2
GSW-2620VHP
2 4 6 8 10 12 14 16 18 20 22 24
PoE
SFP
LNK
ACT
1 3 5 7 9 11 13 15 17 19 21 23 25 26
PoE
1000 LNK ACT PoE In-Use
1
10/100 LNK ACT
Figure 2-2: GSW-2620VHP Switch Front Panel
4 6 8 10 12 14 16
3 5 7 9 11 13 15
4 6 8 10 12 14 16
3 5 7 9 11 13 15
16-Port 10/100/1000T 802.3at PoE +
2-Port Gigabit SFP Ethernet Switch
SFP
17 18
18 20 22 24
SFP
17 19 21 23
17 18