Home Screen; Receiver Parameters Standard Display - Sennheiser ew 100 G4 series Instruction Manual

Home screen

After you switch on the receiver, the display panel initially displays the
Sennheiser logo. After a short time, the home screen is then displayed.
The home screen has three different standard displays.
On the home screen, press the UP and DOWN buttons to switch be-
▷
tween the standard displays.
Receiver Parameters standard display
►
1
RF RF level (radio frequency)
• RF signal level display
• including the display of the squelch threshold (see "Squelch menu
item")
2
AF audio level (audio frequency)
• Displays the audio level of the received transmitter
When the display shows full deflection, the audio input level is exces-
sively high. When the transmitter is overloaded frequently or for ex-
tended periods of time, the
• See "AF Out menu item"
3
Frequency bank and channel
• Current frequency bank and channel number
• See "Frequency Preset menu item"
4
Frequency
• Current receiving frequency
• See "Frequency Preset menu item"
5
Name
• Freely selectable name of the receiver
• See "Name menu item"
6
P pilot tone
• Activated pilot tone evaluation
• See "Advanced -> Pilot Tone menu item"
Using the EM 100 G4
PEAK display is shown inverted.
57