Asa 214; Specifications - Sennheiser ew 100 G4 series Instruction Manual

ASA 214

Specifications

►
ASA 214 antenna splitter
Connection cable
Frequency range
ASA 214-UHF:
ASA 214-1G8:
Amplification
In A – Out A
In A – Out A1 ... A4
In B – Out B1 ... B4
IIP3
Impedance
Reflection loss
Operating voltage
Power consumption
Total power consumption
Antenna amplifier power supply
at ANT RF IN A and ANT RF IN B
Receiver power supply at A1 to
A4
Relative air humidity
Temperature range
Operation:
Storage:
Dimensions
Weight
2 × 1:4 or 1 × 1:8, active
8 pieces, 50 cm, BNC
470 – 870 MHz at –3 dB
1785 – 1805 MHz at –3 dB
0 ± 1 dB
0 ± 1 dB
0 ± 1 dB
20 dBm min.
23 dBm, typical
50 Ω
10 dB (all RF outputs)
13.8 V DC (with power supply unit
NT 1-1)
ASA 1: 245 mA
ASA 1-1G8: 350 mA
max. 2.0 A with 4 receivers and 2 ×
2 antenna amplifiers per antenna
input
12 V, 130 mA
12 V (protected against reverse
supply), 350 mA
5 to 95%
-10 °C to +55 °C (14 °F to 131 °F)
-20 °C to +70 °C (-4 °F to 158 °F)
approx. 212 x 168 x 43 mm
approx. 1090 g
122