Connecting Ipad - Yamaha MMP1 Setup Manual

4-2. Connecting iPad

Next, connect iPad to the network. There are 2 ways to connect them. One is done by using
a Wi-Fi access point, and the other is by using LAN cables.
This time, we will use the Wifi connection. For doing so, first connect a LAN port (not the
WAN port at the bottom) of the access point to the switch.
[Wifi Access Point LAN port]
For connecting iPad to the switch wired, there will be 2 adaptors needed. One is Apple
Lightning USB 3 Camera Adaptor, and the other is Apple USB Ethernet Adaptor. Connect as
shown in the picture below (connect lightning cable to the right connector of the adaptor for
supplying power to the adaptor)
[Lightning-Ethernet Connection]
22