Mounting Procedure; Compass Connection - Raymarine SmartPilot X-5R Drive Installation & Setup

22

Mounting procedure

1. Mount the Fluxgate Compass on a vertical bulkhead, with the cable leaving at the
bottom of the unit.
2. Stick the supplied warning label near to the compass, where it is clearly visible.

Compass connection

Route the compass cable to the Course Computer, securing it at regular intervals with
suitable cable clips/ties.
Connect to the Course Computer as in the following illustration.
Screen
Red
SmartPilot X-5R Drive Installation and Setup Guide
Green
Yellow
Blue
Cable, 8 metres (26 ft)
D10387-1
Fluxgate compass
D10388-1