Table of Contents
Advertisement
3.
Hardware Installation
This chapter provides unpacking and installation information for the DUA-2000 Policy
Manager.
Step 1: Unpacking
Open the shipping carton and carefully unpack its contents. Please consult the list below to
make sure all items are present and undamaged. If any item is missing or damaged, please
contact your local D-Link reseller.
Packing Contents
•
1 x DUA-2000 Policy Manager
•
1 x Master CD
•
1 x Quick Installation Guide
•
1 x DB9-to-RS232 Console Cable
•
1 x Power cord
•
1 x Device Mounting Bracket Kit
•
1 x CAT5e Ethernet cable (1.2m straight-through)
Step 2: Server Installation
For safe server installation and operation, it is recommended that you:
•
Visually inspect the power cord to see that it is secured fully to the AC power
connector.
•
Make sure that there is proper heat dissipation and adequate ventilation around the
server.
•
Do not place heavy objects on the server.
Rack Installation
The Policy Manager can be mounted in an EIA standard size 19-inch rack, which can be
placed in a server room with other equipment. To install, attach the mounting brackets to the
Policy Manager's side panels (one on each side) and secure them with the screws provided.
Then, use the screws provided with the server rack to mount the Policy Manager in the rack.
NOTICE: Please refer to Appendix B – Rack Mount Instructions for safety
instructions on rack mounting the Policy Manager.
Step 3: Powering the Device
Once the Policy Manager has been racked, it is then possible to power the device. Connect
the AC power cord to the rear of the Policy Manager and to an electrical outlet.
NOTICE: It is recommended that the Policy Manager be connected to an
Uninterruptible Power Supply (UPS) to prevent data loss and damage to
hardware in the event of an unexpected power outage.
D-Link DUA-2000 Policy Manager User Manual
4
Advertisement
Table of Contents
