System Logs - D-Link DUA-2000 User Manual

SysLog Server 2
SysLog Server 3
Click Save to save the changes made.
Click Cancel to revert the settings to their previous state.

System Logs

The page is used to configure the system logs sent to remote logging servers.
To get to the following page, browse to: Maintenance >> Logs >> System Logs:
Syslog server.
Severity. The severity of the logging sent to the Syslog
server.
The status of SysLog Server 2. This can be set to:
Disabled. Disable Syslog logging.
Enabled. Enable Syslog logging. The following fields are available:
FQDN / IP Address. The DNS name or IP address of the
Syslog server.
Severity. The severity of the logging sent to the Syslog
server.
The status of SysLog Server 3. This can be set to:
Disabled. Disable Syslog logging.
Enabled. Enable Syslog logging. The following fields are available:
FQDN / IP Address. The DNS name or IP address of the
Syslog server.
Severity. The severity of the logging sent to the Syslog
server.
Table 10-32 – Syslog Server
Figure 10-26 – System Logs
83
D-Link DUA-2000 Policy Manager User Manual