Reboot - D-Link DUA-2000 User Manual

Field
USB Device
Status
Select Folder
Click Restore to restore the system configuration from the backup.

Reboot

Use this page to reboot the Policy Manager. This can be done with both the existing
configuration settings and restoring the settings to their factory defaults.
To get to the following page, browse to: Maintenance >> System >> Reboot:
Click Soft Reboot to reboot the Policy Manager, keeping the current configuration.
Click Factory Reboot to reboot the Policy Manager, restoring the factory default
configuration.
NOTICE: Clicking Factory Reboot will restore the Policy Manager to the factory
default configuration. This will lose any configuration settings and the device will
be unreachable for about 150 seconds.
HA
High Availability (HA) is configured on this page. This consists of two Policy Managers in an
HA pair, with one Active and one Standby. If the heartbeat signal is lost between the devices,
then they both become Active.
Description
The USB device status of USB port 2. This can be:
Connected
Disconnected
The folder on the USB drive where the backup files are located.
Table 10-29 – Restore from USB Port 2
Figure 10-23 – Reboot
80
D-Link DUA-2000 Policy Manager User Manual