Endpoint To Location Profile - D-Link DUA-2000 User Manual

Field
Endpoint Name
MAC Address
Port List
Description
Click Apply to apply the settings.

Endpoint to Location Profile

This is used to bind an Endpoint to a Location Profile. It can also be used to create new
Location Profiles.
NOTE: A maximum of 10 Endpoints can be configured in one Location Profile.
To get to the following page, browse to: Policy & Object >> Endpoint >> Location Profile
and click on the Endpoint to Location Profile tab:
The following fields are available:
Description
The name of the Endpoint. This can be a switch or wireless AP.
The MAC address of the Endpoint, in the format: xx:xx:xx:xx:xx:xx.
This is the MAC address of the switch or wireless AP.
The ports on the switch or wireless AP that are associated with the
Endpoint.
The MAC Address identifies the Endpoint and the switch stack ID and
port number identify the ports that are associated with the Endpoint.
For example, switch ports 1-4 on switch 1 in the stack could be one
location and port 5 on switch 2 in the stack could be another location.
The Port List is comma separated and is in the format: <switch stack
ID>:<port ID>. A hyphen ('-') can be used to specify a range. For
example: 1:1-1:4,2:5.
The description of the Endpoint.
Table 9-20 – Add Endpoint to List
Figure 9-15 – Endpoint to Location Profile
46
D-Link DUA-2000 Policy Manager User Manual