Port Trunking Advance Setting - D-Link DUA-2000 User Manual

Metric
DNS
Port Trunk
Click Apply to apply the settings.

Port Trunking Advance Setting

Click the Port Trunking Advance Setting tab to view the following window:
The following fields can be configured:
Field
Algorithm
The metric for the interface in the routing table on the DUA-2000. This
decides the preference of the interface for outgoing traffic.
Default is 0. The range is: 0 - 999.
Assign DNS servers for the interface.
Configure the ports as a trunk. This binds more than one physical
interface together to create an interface bundle.
Select a bundle negotiation type of: Static or LACP.
Static creates a port trunk with the network switch without any
negotiation. Selecting Link Aggregation Control Protocol (LACP)
allows the DUA-2000 to negotiate a port trunk with the network switch.
Table 8-2 – Add IP Interface
Figure 8-3 – Port Trunk Advance Setting
Description
Choose the load-balancing algorithm for the Port Trunk. The options
are:
L2 (DA + SA)
Layer 2, destination MAC address and source MAC address
L2+L3 (MAC + IP)
Layer 2 and 3, MAC address and IP address
L3+L4 (IP + TCP/UDP)
19
D-Link DUA-2000 Policy Manager User Manual