Draytek Vigor2762 Quick Start Manual page 22

Note
Click OK on that page to apply the changes.
3. Go to [WAN] > [Internet Access]
Firstly set the WAN1 Access Mode to MPoA / Static or Dynamic IP, then click the
Details Page button to proceed:
4. In the MPoA / Static or Dynamic IP settings:
Select the Enable option and select Obtain an IP address automatically which will
obtain an IP from the ISP using DHCP.
If your ISP has provided a static IP range, with a Network address and a Subnet Mask,
specify that with the Specify an IP address option.
Please note that this value is correct for ISPs that operate over
the Openreach VDSL2 network, if your ISP operates on a
different VDSL2 network, this tag value may differ; please check
with your ISP or the DrayTek UK Knowledgebase for ISP specific
guides.
17