Setting Up The Headset - RocketFish RF-SH230 User Manual

Setting up the headset

Charging the headset
Before using the headset, you need to charge the battery.
To charge the battery:
1 Plug the power supply into a power outlet.
2 Plug the other end of the power supply into the headset
charging socket [2]. The indicator light [1] turns green to
indicate the headset battery is charging.
3 Unplug the headset from the power supply after the
indicator light turns off. The headset is fully charged.
Note:
The headset does not work while charging.
If the indicator light remains off when you connect it to the
power supply, the battery is already fully charged and does
not require further charging.
To maximize battery life, do not charge the headset longer
than necessary.
When your battery is completely discharged, it takes up to
three hours to fully charge your headset.
6