Using The Headset; Headset Functions - RocketFish RF-QX3 User Manual

# Component
Indicator light
5
Charger connector
6

Using the headset

Headset functions

Headset function
Voice dial
Redial
Answer a call
End (cancel) a call
Reject a call
Transfer a call between connected
devices
Mute or unmute
Adjust the earpiece volume
Erase all pairing information
Turn the indicator on or off
Check the battery status
6
Description
Power on—Lights solid yellow-green for 1 second and the headset beeps
once.
Pairing mode—Rapidly flashes yellow-green.
The flashing continues for approximately three minutes or until the headset is
connected to a compatible phone. If the headset is not connected to a phone
during this time, the headset enter connectable status.
Connectable—Flashes yellow-green once every 2.5 seconds.
Connection active—Flashes yellow-green every 5 seconds.
Incoming call—Flashes yellow-green two times every 1 second.
Active call—Flashes yellow-green every 5 seconds.
Power off—Lights solid red for 1 second and the headset beeps once.
Low battery—Alternately flashes yellow-green and red, and the headset
beeps every 300 seconds.
Connect the charger to this jack and to a power outlet to charge the battery.
Button presses
Press the power/send/end button.
Double-press the power/send/end button.
Press the power/send/end button.
Press and hold the power/send/end button for two
seconds.
Double-press the power/send/end button.
Double-press the power/send/end button while in
a call to transfer call to handset.
Press volume up and volume down buttons at the
same time.
Press volume up or volume down button.
When the headset is turned off, press and hold
power/send/end and volume up buttons until the
indicator flashes red and yellow-green alternately.
When the headset is connected to a phone, press
and hold the power/send/end and volume up
buttons for four seconds.
Press and hold the power/send/end for two
seconds.
RF-QX3 Wireless Bluetooth Headset