Charging The Battery; Turning The Headset On Or Off; Pairing The Headset With A Compatible Phone - RocketFish RF-QX3 User Manual

Charging the battery

Before using the headset, you must charge the battery for
approximately two hours. When the battery is fully charged, it
provides up to 8 hours of talk time or up to 300 hours of standby
time.
To charge the battery:
• Connect the charger to the headset and to a power outlet. While the
battery is charging the indicator lights red. When the battery is fully
charged, the indicator lights yellow-green.

Turning the headset on or off

To turn the headset on or off:
To turn on the headset, press and hold the power button for about two
1
seconds. The headset beeps and the indicator blinks yellow-green. (The
first time you turn on the headset, you have to press and hold the power
button for five seconds.)
To turn off the headset, press and hold the power button for about four
2
seconds. The headset beeps and the indicator briefly lights red.

Pairing the headset with a compatible phone

Pairing is the process of linking the headset with a Bluetooth-enabled
mobile phone. After you pair the headset with a phone, you can only
use the headset with the paired phone. If you want to use the
headset with a different phone, you must repeat the pairing process
with the new phone. The headset can be paired with up to eight
compatible phones, but it can be connected to only one phone at a
time.
To pair the headset with a compatible phone:
Make sure that the compatible phone is turned on and within 33 feet
1
(10 meters) of the headset.
Turn on the headset and make sure that the battery is fully charged.
2
Press and hold the power/send/end button for about four seconds. The
3
indicator rapidly flashes yellow-green.
Release the button. The headset is now in pairing mode.
4
Activate the Bluetooth connection from the phone. See the
5
documentation that came with the phone for instructions.
Set the phone to start searching for Bluetooth devices.
6
RF-QX3 Wireless Bluetooth Headset
7