ATEN CS1708i User Manual page 49

Setting
SCAN–SKIP Selects which computers will be accessed under Skip Mode (see
MODE F5: SKP, page 36), and Auto Scan Mode (see F7: SCAN, page 38).
Choices are:
ALL - All the Ports which have been set Accessible (
page 99),
POWERED ON - Only those Ports which have been set Accessible
and are Powered On;
QUICK VIEW - Only those Ports which have been set Accessible
and have been selected as Quick View Ports (see SET QUICK
VIEW PORTS, page 35);
QUICK VIEW + POWERED ON - Only those Ports which have
been set Accessible and have been selected as Quick View Ports
and are Powered On.
The default is ALL.
Note: The quick view choices only show up on the administrator's
screen, since only he has Quick View setting rights (see SET
QUICK VIEW PORTS, page 35, for details).
SCREEN If there is no input from the console for the amount of time set with
BLANKER this function, the screen is blanked. Key in a value from
0–30 minutes, then press [Enter]. A setting of 0 disables this
function. The default is 0 (disabled).
HOTKEY Enables / Disables the Hotkey Command function in case a conflict
COMMAND with programs running on the computers occurs. The default is ON.
MODE
HOTKEY This setting selects the Hotkey invocation keys (see Invoking
Hotkey Mode, page 41). Choices are:
[Num Lock] + [–] or [Ctrl] + [F12]
The default is [Num Lock] + [–].
OSD Sets the language used in the OSD. Choices are: English (default),
LANGUAGE German, Japanese, Simplified Chinese and Traditional Chinese.
Function
4. OSD Operation
see Access
,
33