ATEN CS1708i User Manual page 152

Kvm over ip, full hd version
Hide thumbs Also See for CS1708i:
Table of Contents

Advertisement

CS1708i / CS1716i User Manual
Information
Common Name
mycompany.com
Note: This must be the exact domain name of the site that you
want the certificate to be valid for. If the site's domain name is
www.mycompany.com, and you onlyNote: specify
mycompany.com, the certificate will not be valid.
E-mail Address
administrator@yourcompany.com
3. After filling in the form (all fields are required), click Create.
A self-signed certificate based on the information you just provided is now
stored on the KVM over IP switch.
4. Click Get CSR, and save the certificate file (csr.cer) to a convenient
location on your computer.
This is the file that you give to the third party CA to apply for their signed
SSL certificate.
5. After the CA sends you the certificate, save it to a convenient location on
your computer. Click Browse to locate the file; then click Upload to store
it on the KVM over IP switch.
Note: When you upload the file, the KVM over IP switch checks the file to
make sure the specified information still matches. If it does, the file is
accepted; if not, it is rejected.
If you want to remove the certificate (to replace it with a new one because of a
domain name change, for example), simply click Remove CSR.
136
Example

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs1716i

Table of Contents