Radio Shack 32-2054 Owner's Manual page 5

Set the audio input sources' controls to these levels.
Audio Device
Turntable
Tape Deck
CD Player
Amplifier
Receiver
Warning: To prevent possible hearing loss, set the
amplifier's controls to the settings shown below.
Control
Power
MIC 1, MIC 2, PHONO/AUX
100 Hz, 1 kHz, 8 kHz
MASTER VOLUME
After you turn on the amplifier or change the
program source, set the controls to a comfortable
listening level.
You can connect optional components, such as
microphones, tuners, turntables, or CD players to
your amplifier to expand your system. To prevent
hum and other noise, use low-capacitance shielded
cable. Your local RadioShack store carries a wide
selection of audio components and connecting
cable.
Control
Power
Power
Power
Power
Tone
Setting
0dB (mid position)
Setting
Off
Off
Off
Off
Flat
Out
MIN
MIN
5