Table of Contents
Advertisement
Software Control
14. Connect an analog signal to analog INP or analog INM and capture the data again from the ADC.
Figure 5
shows data captured from the ADC with a 25-MHz sinusoid at analog INP and sampling rate
of 250 MSPS.
•
You can switch between data from channel 1 and 2 of the ADC from the HSDC Pro GUI interface.
Refer to the HSDC Pro GUI users guide (SLWU087) for more details.
Figure 5. ADC Data Capture, 25 MHz Sinusoid, 250 MSPS Sampling Rate
8
ADS42JB46, ADS42JB49, and ADS42JB69 Evaluation Module
Copyright © 2012–2017, Texas Instruments Incorporated
Copyright © 2017, Texas Instruments Incorporated
SLAU467D – November 2012 – Revised February 2017
Submit Documentation Feedback
www.ti.com
Advertisement
Table of Contents
