7. Place the test pattern face down on the original
glass.
8. Place about ten sheets of A3
paper on the test pattern placed on the original
glass.
Lower the cover.
9. Press the start key.
The machine will start reading the test pattern.
10. When the machine completes reading the test
pattern, the "Gradation Adjust" screen will reap-
pear.
11. Repeat steps from 6 through 9 to let the
machine read the test pattern two times.
12. Touch "Gradation Mode" and press the start key.
A test pattern will then be produced on the
A3
or Ledger
A02EIXC041DA
or Ledger
A02EIXC042DA
paper.
A00JIXE186DA
13. Place the test pattern face down on the original
glass.
14. Place about ten sheets of A3
paper on the test pattern placed on the original
glass.
Lower the cover.
15. Press the start key.
The machine will start reading the test pattern.
16. When the machine completes reading the test
pattern, the "Gradation Adjust" screen will reap-
pear.
17. Repeat steps from 12 through 15 to let the
machine read the test pattern two times.
18. Touch "Resolution Mode" and press the start
key.
A test pattern will then be produced on the
A3
or Ledger
E-10
A02EIXC043DA
or Ledger
A02EIXC042DA
paper.
A00JIXE187DA