Assembly - Delta 50-767 Instruction Manual

For your own safety, do not connect the machine to the power source until the machine is
completely assembled and you read and understand the entire instruction manual.
ATTACHING THE CASTERS
1. Turn the base frame onto its side (Fig 1).
2. Insert threaded portion of caster into
through hole on the bottom of the base
frame.
3. Tighten acorn nut.
4. Repeat for the other caster.
ATTACHING THE REAR WHEELS
1. Place base frame upright.
2. Insert M12 flat washer onto shoulder bolt
(Fig 2).
3. Insert shoulder bolt through rear wheel.
4. Place another M12 flat washer between
wheel and base.
5. Tighten shoulder bolt.
6. Repeat for other wheel.

ASSEMBLY

ASSEMBLY TIME ESTIMATE
30 minutes to 1 hour
This machine is heavy. Use two or more people when lifting.
8
FIGURE 1
FIGURE 2