Rear Panel
Figure 1-3 shows the signal generator rear panel. The signal generator rear panel provides
input, output, and remote interface connections. Descriptions are provided for each
characteristic of the rear panel.
Figure 1-3
1. AC Power Receptacle
The line voltage is connected here. The power cord receptacle accepts a three-pronged power
cable that is shipped with the signal generator.
2. GPIB
The GPIB interface allows listen and talk capability with compatible IEEE 488.2 devices.
Chapter 1
Rear Panel Diagram
Signal Generator Overview
Rear Panel
1. AC Power Receptacle
2. GPIB
3. AUXILIARY INTERFACE
4. 10 MHz IN
5. LAN
6. 10 MHz OUT
7. SWEEP OUT
8. SOURCE MODULE
9. TRIGGER OUT
10. TRIGGER IN
11. SOURCE SETTLED OUTPUT
15