Replacing Main Back; Replacing Side Trim; Oven Door Removal (Select Models); Replacing Oven Door Handle (Select Models) - Maytag ALY1680BD series Service Manual

Disassembly Procedures
5. Slide vent up and out to remove flue box.
6. Reverse procedures to reassemble.
Burner Box Bottom
Side Trim
Control Panel
Oven Rack
Oven Bottom
Range Components, Oven and Frame

Replacing Main Back

1. Remove unit from installation position, see "Replacing
Range/Cooktop" procedure.
2. Remove maintop, see "Replacing Maintop Assembly"
procedure.
3. Remove screws securing main back to chassis.
4. Reverse procedures to reassemble.

Replacing Side Trim

1. Remove unit from installation position, see "Replacing
Range/Cooktop" procedure.
2. Remove maintop, see "Replacing Maintop Assembly"
procedure.
3. Remove screws securing maintop guide pins to side
trim.
4. Remove bolt and nut securing side trim to chassis.
5. Remove screws securing side trim to chassis.
6. Slide side trim up and toward the front to remove.
7. Reverse procedures to reassembly.
Oven Door Removal
!
WARNING
To avoid risk of personal injury or property damage,
do not lift oven door by the handle.
1. Turn off and remove power from unit (if electric unit).
2. Turn off and remove gas supply from unit.
3. Open oven door.
©2005 Maytag Services
Flue Box
Main Back
Oven Cavity
Oven Hinge Spring
(Select Models)
To avoid risk of electrical shock, personal injury or
death; disconnect power and gas before servicing.
4. Remove screws securing door panel to inner door
(also glass panel on select models).
5. Remove screws securing bottom oven door bracket
to oven chassis.
6. Remove screws securing inner door to hinge
receptacles.
7. Pull and slide hinge spring arms away from hinge
receptacles.
8. Hook spring arms into oven chassis hinge slots until
reassembly.
9. Reverse procedures to reassemble.
Replacing Oven Door Handle
To avoid risk of personal injury or property damage,
do not lift oven door by the handle.
1. Turn off and remove power from unit (if electric unit).
2. Turn off and remove gas supply from unit.
3. Open oven door.
4. Remove screws securing door panel to inner door
(also glass panel on select models).
5. Remove screws securing oven door handle to oven
door (also glass panel on select models).
6. Reverse procedures to reassemble.
Replacing Oven Door Hinge
To avoid risk of personal injury or property damage,
do not lift oven door by the handle.
1. Remove oven door, see "Oven Door Removal"
procedure.
2. Slide hinge out from inner door assembly.
3. Reverse procedures to reassemble.
16023515
(Select Models)
!
WARNING
(Select Models)
!
WARNING
17