Basic Operation - Jensen JWM70A Installation And Owner's Manual

BASIC OPERATION

20
1
2
3 4
5 6
Power
Press the POWER button (1) to turn the unit on.
The unit will resume at the last mode (Tuner, Aux, etc.).
Zones Volume Control
1. Press the ZONES button (5) to enter the zone menu.
2. While in the zone menu, press ZONES, ENTER (4), or the |<< or >>| buttons
(6, 8) to change the active zone (ZONE A, ZONE B and ZONE C) for volume
adjustment control.
NOTE: Zone A also controls the output of the rear line level audio out.
3. Rotate the VOL/ENTER knob (4) clockwise toincrease or counter-clockwise to
decrease the active zone's volume.
NOTE: Set the zone volume to '0' to turn off the zone.
Each zone has a maximum volume setting of '40'.While adjusting the volume, the
LCD displays numerical representation of the level.
Zone Mute
While in zone menu (see above), press and hold the ENTER knob button to mute
the audio output of the active zone's volume. Press and hold again to restore the
previous volume level.
Pause / Mute
During RADIO / FRONT AUX / REAR AUX / HDMI ARC mode, press the ▶|| button
(7) to mute the audio output for all zones. Press again to restore the previous
volume level.
During USB / DVD / BT mode, press the ▶|| button to pause playback. Press again
to resume playback.
19 18 17 16
15
14
13
12
11
9
7 8 10
Mode
1. Press the MODE button (15), the LCD will display "MODE" and access mode
selection.
2. Press the MODE button, |<< or >>| buttons (6, 8), or rotate the VOL/ENTER knob
to cycle through the available modes and choose the desired mode. Available
modes are AM, FM, FRONT AUX, REAR AUX, HDMI ARC, DISC and USB.
3. Press ENTER knob (4) to confirm the mode selection.
Audio Menu Setting
1.Press the SETTINGS button (14) to access the audio menu.
2.Press the |<< or >>| buttons (6, 8) or SETTINGS button repeatedly to navigate
through the audio menu items.
3.Once the desired menu item appears on the display, adjust that option by rotating
the VOL/ENTER knob (4) clockwise or counter-clockwise within 5 seconds.
4.Press the Back button (2) to confirm your selection and exit audio menu. The unit
will automatically exit the audio menu after 5 seconds of inactivity.
The following items can be adjusted:
BASS: Adjust the Bass level from "-7" to "+7".
Ÿ
Ÿ TREBLE: Adjust the treble from "-7" to "+7".
Ÿ BALANCE: Adjust the Balance between the left and right speakers output from
"LEFT 7" (full left) to "RIGHT 7" (full right).
"BALANCE 0" indicates equal balance between the left and right speakers.
FADE: Adjust the speaker fade between the rear and front speakers from "REAR
Ÿ
7" (full rear) to "FRONT 7" (full front).
"FADE 0" indicates equal balance between the rear and front speakers.
Ÿ LOUDNESS: Toggle the loudness on/off. When listening to music at low
volumes, this feature will boost the bass/treble range to compensate for the
characteristics of human hearing.
EQUALIZATION: Choose one of the following pre-defined bass and treble
Ÿ
curves: POP > CLASSICAL > ROCK > FLAT.
System Menu Setting
1. Press and hold the SETTINGS button (14) for 2 seconds to access the system
menu.
2. Press the |<< or >>| buttons (6, 8) or SETTINGS button repeatedly to navigate
through the system menu items.
3. Once the desired menu item appears on the display, adjust that option by rotating
the VOL/ENTER knob clockwise or counter-clockwise within 5 seconds.
4. Press the Back button (2) to confirm your selection and exit audio menu. The unit
will automatically exit the audio menu after 5 seconds of inactivity.
The following items can be adjusted:
BLUETOOTH DEVICE (Lock/Unlock, Disconnect/Connect, Delete): View, lock
–
and delete from a list of previously paired mobile phone device models.
BEEP (ON/OFF): Turn the audible beep On/Off (heard when functions/buttons
–
are selected).
7
JWM70A