Controls - RIDGID SP6263 Owner's Manual

Rip Scale &
Rip Indicator
(Out-Rip)
Control Function
Bevel Lock Lever Frees motor to rotate; locks in any
desired position
Miter/Arm Lock Frees radial arm to move; locks in
Lever any desired position; pre-set
indexed positions at 0°, 45°L,
45°R
On-Off Switch Turns motor on/off
Yellow Key Allows saw to be switched on
Bevel Index Lever Indexes the saw blade to 0°, 45°,
or 90° pre-set index positions then
release it
Rip Scale & Rip Tells approximate distance
Indicators between blade and fence when
saw is in in-rip or out-rip position
Miter/Arm Lock Lever
On-Off Switch
Yellow Key
Bevel Index Lever
Bevel Lock Lever
Operation/ Comments
Pull lever to release and push to lock
Support motor before unlocking because it
can swing down quickly
Bevel index lever must be unindexed before
moving motor
Pull lever forward to release index
then swing arm left or right Hold in
unlocked position while moving arm
Push lever to rear to lock arm
Pull on, push off
Requires yellow key
Insert into on-off switch
Remove after turning saw off
Move bevel index lever to the left
while positioning the blade, then
release it
Move blade carriage along arm to
align line on indicator with desired
number on scale

Controls

37