Changing Your Home City Time Setting In 15-Minute Steps; Adjusting The Time And Day Setting - Casio Oceanus OCW-G2000S-1A Operation Manual

1.
Pull out the crown to the second click.
This will cause the disk to shows the
current Home City.
You can find out whether or not location
●
information about your current Home
City is available by checking the day of
the week hand position.
"P": Available
"N": Not available
Home City
Day of the week hand
2.
Rotate the crown to change the World
Time City.
For information about the Home City,
●
see "City List".
3.
Press (A).
You can find out the current summer time
setting by checking the day of the week
hand position.
"AT (AUTO)"
●
The watch switches between standard
time and summer time automatically.
"STD"
●
The watch always indicates standard
time.
"DST"
●
The watch always indicates summer
time.
4.
Hold down (A) for about one second to
change the summer time setting.
Each time you hold down (A) for about one
second, the setting will cycle through
options in the sequence shown below.
"AT (AUTO)"n"STD"n"DST"
5.
Push the crown back in to its normal
position.
Operation Guide 5501
Changing Your Home City
Time Setting in 15-minute
Steps
1.
Pull out the crown to the second click.
This will cause the disk to shows the
current Home City.
2.
Hold down (C) for about one second.
Crown
The disk will show l.
3.
Rotate the crown to change the time and
day settings.
The data setting will change in 15-minute
increments.
4.
Push the crown back in.
Note
Changing the time setting with this
●
operation will cause Home City
location information to be deleted
from the watch.
Adjusting the Time and Day
Setting
1.
Pull out the crown to the second click.
This will cause the disk to shows the
current Home City.
Home City
Crown
Hours Minutes
Crown
Home City
2.
Hold down (C) for about 10 seconds.
This causes the second hand to move to
12 o'clock, and enables the minute setting
operation.
3.
Rotate the crown to change the minute
setting.
4.
Press (C).
The hour hand will move slightly,
indicating that the hour setting operation
is enabled.
5.
Rotate the crown to change the hour
setting.
6.
Press (C).
This changes to the year setting
operation.
Year (10's digit)
00
10
90
80
70 50
60
0
1
9
8
7 5
6
Year (one's digit)
7.
Rotate the crown to move the hour hand
to the desired setting for the year ten's
digit, and the minute hand to the desired
one's digit.
8.
Press (C).
This changes to the month setting
operation.
12
11 1
10
9
8
7 5
6
Month
9.
Rotate the crown to change the month.
20
30
40
2
3
4
2
3
4
12