Adjusting Time Settings Manually; Setting A Home Time City; Changing Your Home City Time Setting In 15-Minute Steps - Casio 5502 Operation Manual

Adjusting Time
Settings Manually
You can use the procedure below to adjust the
watch's time and day settings when GPS and
time calibration signal reception is not
possible, or communication with a phone is
not possible for some reason.

Setting a Home Time City

Use the procedure in this section to select a
city to use as your Home City. If you are in an
area that observes summer time, you can also
enable or disable summer time.
Note
The initial factory default summer
●
time setting for all cities is "AT
(AUTO)". In many cases, the "AT
(AUTO)" setting lets you use the
watch without switching between
summer time and standard time.
In the cases described below,
●
receiving GPS position information
will automatically cause "AT
(AUTO)" to be selected for the
summer time setting.
When the home city of the current
ー
receive operation is different from
the watch's home city setting prior
to the receive operation.
When the Home City is
ー
unchanged, but the acquired
location information is for a
geographic area with different
summer time rules (start date, end
date)
Operation Guide 5502
1.
Pull out the crown to the second click.
The second hand will move to the
currently set Home City.
You can check the approximate latitude
●
and longitude of your current location.
Press (A) and the mode hand will
●
indicate whether or not location
information about your current Home
City is available.
"P": Available
"N": Not available
2.
Rotate the crown to change the World
Time City.
For information about the Home City,
●
see "City List".
3.
Press (B).
The mode hand will indicate the current
summer time setting.
"AT (AUTO)"
●
The watch switches between standard
time and summer time automatically.
"STD"
●
The watch always indicates standard
time.
"DST"
●
The watch always indicates summer
time.
4.
Hold down (B) for about one second to
change the summer time setting.
Each time you hold down (B) for about one
second, the setting will cycle through
options in the sequence shown below.
"AT (AUTO)"n"STD"n"DST"
5.
Push the crown back in to its normal
position.
30
Crown
Home City
30
Changing Your Home City
Time Setting in 15-minute
Steps
1.
Pull out the crown to the second click.
The second hand will move to the current
Home City.
30
Home City
2.
Hold down (C) for about one second.
This will cause the mode hand to move to
l.
30
3.
Rotate the crown to change the time and
day settings.
The data setting will change in 15-minute
increments.
30
4.
Push the crown back in.
Note
Changing the time setting with this
●
operation will cause Home City
location information to be deleted
from the watch.
Crown
14