Husqvarna 390XP Workshop Manual page 25

11.2.5 Replacing the front hand grip
1. Release the two cable clips beside the spring. See
fig. 16.
2. Remove the five bolts (A, B, C and D) which hold
the front hand grip. See fig. 15.
3. Fit the new front hand grip by screwing in the five
bolts (A, B, C and D). Tighten the bolts. See fig. 15
and also refer to "4 Service data" on page 10.
4. Connect the two cables. See fig. 16.
Fig. 18
Fig. 18
A
A
B
B
C
C
Fig. 19
Fig. 19
Fig. 15
Fig. 16
Fig. 20
Fig. 20
Electrical system
D
D
English - 25