Service Schedule - CYBEX 770T Owner's Manual

Service Schedule

All maintenance activities shall be performed by qualified personnel. Failure to do so could result in
serious injury.
This is the minimum recommended service.
Determine distance
1. Tap the Access Toolbox icon to display the Access to Toolbox login screen.
2.
Enter the sequence:
3. Press the Statistics icon to access the Recorded Statistics screen.
4. Locate and tap the icon tor Treadmill Totals.
5. Record Distance.
6.
Tap the Back
7. Locate and tap the icon for Belt or Deck.
8. Record Distance.
9. If replacing the running belt, tap the Belt icon, then tap the New Belt Reset icon to reset odometer.
10. If replacing the running deck, tap the Deck icon, then tap the New Deck Reset icon to reset odometer.
11.
Exit Set Up Mode by tapping the Toolbox
refresh.
First 500 miles (800 km).
Check running belt tension and tracking.
Every 5,000 miles (8,000 km).
1. Check running belt tension and tracking.
2. Vacuum the fan and heat sink area of the motor controller.
3. Move treadmill and vacuum underneath.
4. Use Service wheel, or raise elevation to 15%, carefully roll the treadmill backwards to clean
underneath with a dry cloth and vacuum. Return to normal position when done.
Cybex Treadmill Product Number 770T Part Number LT-22983-4 M
CYBEX Press and hold Cybex logo for 6 seconds to access Screen
LOGO Lock and Toolbox.
LANGUAGE Press and hold language logo for 6 seconds to access Screen
ICON Lock and Toolbox.
icon to return to the Recorded Statistics screen.
.
icon, then tap the Home icon
Page 73 of 105
. The screen will