Needle Thread Preparation - JUKI HZL-NX7 Instruction Manual

4.11. Needle thread preparation

■ Preparation
A
1
Make sure to push the needle to the top.
If the needle is not attached appropriately, the needle
cannot be threaded with the automatic needle thread-
er.
* Use the needle: No.11-16 and the thread:
No.30-90.
2
Align the marking A at the hand wheel
with the one on the machine body.
3
Turn the power ON.
4
Lift the presser foot.
* You can thread the machine correctly on
condition that the machine is turned on and
presser foot is up position.
5
Press the lock key to activate the lock
mode.
31