Needle Thread Preparation; Threading The Needle Thread - JUKI HZL-DX series Instruction Manual

Needle thread preparation

Threading the needle thread

4
1
Spool cap Small spool
Spool cap
Large spool
22
3
1
2
Turn OFF the power switch be-
Attention
fore threading the machine head.
2
Note:
Make sure to push the
needle to the top.
It is impossible to perform
stitching if the needle is not
correctly installed or a bent
needle is used. Pay close at-
5
tention as this will cause ma-
chine malfunction.
* Use the needle: No.11-16
* When twin needle is used,
* Align the marking at the
hand wheel with the one
on the machine body.
Lift the presser foot lifting lever.
Place a thread spool to the spool pin and
a spool cap onto the spool pin.
There are three types of the spool caps, large, medi-
um and small. Choose the size of spool cap according
to thread spool to be used.
and the thread: No.30-90.
the automatic needle
threader can not be used.