System Information - Janome QUILT MAKER PRO Instruction Manual

System Information

Information contained in the white ovals identify the
electronics board revision numbers as well as the
firmware revision numbers of the Janome Quilt Maker
Pro 18 and its handlebars. The Lifetime and Trip (or
project) stitch counters count the number of stitches
the machine has performed. The Lifetime count is the
total number of stitches made since the machine was
built. The Trip Counter can be reset to keep track of the
number of stitches made during a given project. To reset
this counter, press the blue "Reset" button just to the left
of the "Trip" box. The Lifetime counter cannot be reset
and should be used as an indicator to determine when
general machine maintenance should be performed by
an authorized Janome Representative. (Figure 43)
Figure 43
Press the "Main" button to return to the "Regulated" or
"Manual" menu screen or the "Back" button to return to
the "More" menu screen.
Set Language
The Janome Quilt Maker Pro 18 screens can appear
in English, French, German, or Spanish. On the More
Screen, press the lower-left button to cycle between
English, Français, Deutsch, and Español. After selecting
your preferred language, press Main to return to the
Main Screen.
Press the "Main" button to return to the "Regulated" or
"Manual" menu screen or the "Back" button to return to
the "More" menu screen.
Diagnostics Screen
Seven different diagnostics tests can be performed on
the machine. These functions test the motion encoders,
the motor control functions, the key switches and the
internal position sensors. (Figure 44)
Press the "Main" button to return to the "Regulated" or
"Manual" menu screen or the "Back" button to return to
the "More" menu screen.
Figure 44
janome.com Page 27