Error And Warning Messages; Registering Your Device - Garmin GHP Compact Reactor Hydraulic Installaiton Instructions

Type

Error and Warning Messages

Error Message Cause
ECU Voltage is Low The pump supply voltage
has fallen below 10 Vdc for
longer than 6 seconds.
Autopilot is not The autopilot is no longer
receiving navigation receiving valid navigation
data. Autopilot placed data while performing a
in Heading Hold. Route To maneuver.
This message also
appears if navigation is
stopped on a chartplotter
before the autopilot is
disengaged.
Connection with The helm control has lost
Autopilot Lost connection with the CCU.
Lost Wind Data The autopilot is no longer
(sailboat only) receiving valid wind data.
Error: Lost Communication between
Communication the CCU and the pump has
Between ECU and timed out.
CCU (when the
autopilot is engaged)

Registering Your Device

Help us better support you by completing our online registration
today.
• Keep the original sales receipt, or a photocopy, in a safe
place.
Garmin ® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered
in the USA and other countries. GHP ™ , GHC
trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without
the express permission of Garmin.
NMEA , NMEA 2000 , and the NMEA 2000 logo are trademarks of the National Marine
® ®
Electronics Association. Uflex and MasterDrive
®
Teflon ® is a trademark of DuPont ™ .
Sentence
grme
gsa
gsv
rmc
bod
bwc
dtm
gll
rmb
vhw
mwv
xte
Autopilot Action
• Alarm sounds
for 5 seconds
• Continues in
normal
operation
• Alarm sounds
for 5 seconds
• Autopilot
transitions to
heading hold
N/A
• Alarm sounds
for 5 seconds
• Autopilot
transitions to
heading hold
• The helm control
beeps, and
autopilot
transitions to
standby.
™ , Reactor ™ , and Shadow Drive ™ are
are trademarks of the UltraFlex Group.
™
Discover other marine electronics & navigation on our website.