Trane GEH 006 Manual page 22

22
Features and Benefits
ZN510 & ZN524 Controls
Tracer ZN510 & ZN524 Controls
The Tracer ZN510 and ZN524 are direct digital control (DDC) systems specifically
designed for single and dual circuited water-source equipment to provide control
of the entire unit, as well as outputs for unit status and fault detection. Each de-
vice is factory installed, commissioned, and tested to ensure the highest level of
quality in unit design.
Each of the controller's features and options were selected to coordinate with the
unit hardware to provide greater energy efficiency and equipment safety to pro-
long the equipment life.
In addition to being factory configured for control of the unit fan, compressor and
reversing valve, the ZN510 and ZN524 controllers are designed to coordinate the
waterside of the water-source system through the Tracer Loop Controller (TLC).
If applied in a peer-to-peer communication environment, data between similar
controllers may be exchanged without requiring a building automation system.
By teaming the ZN510 and ZN524 with the TLC, a low first-cost for the mechanical
equipment, water loop, and water pump optimization is provided to the owner.
For owners who require a full building integrated "open protocol" system, The
ZN510/ZN524/TLC application is upgradable to support complete building con-
trol through Tracer Summit. Because the ZN510 and ZN524 is LonTalk certified,
it is capable of working with, and talking to other LonTalk certified controllers
providing the building owner more choices, and the design engineers more flex-
ibility to meet the challenges of building automation. See Figure 31 for ZN510
control box.
Figure 31: ZN510 control box
WSHP-PRC001-EN