Replacing The Headlight Bulb - Yamaha TT-R TT250RN Owner's Manual

1
1. Bolt (×3)

Replacing the headlight bulb

This motorcycle is equipped with a
quartz bulb headlight. If the headlight
bulb burns out, replace it as follows.
1. Remove cowling A. (See page
6-5 for cowling removal and
installation procedures.)
2. Remove the headlight unit by
removing the bolts.
3. Disconnect the headlight cou-
pler, and then remove the head-
light bulb cover.
4. Remove the headlight bulb hold-
er by turning it counterclockwise,
and then remove the defective
bulb.
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Bulb holder
EAU01235
w
Headlight bulbs get very hot.
Therefore, keep flammable prod-
ucts away from a lit headlight bulb,
and do not touch the bulb until it
has cooled down.
5. Place a new bulb into position,
and then secure it with the bulb
holder.
1
a. Don't touch this area.
EW000119
cC
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the
bulb, and the bulb life will be
adversely
clean off any dirt and fingerprints
on the headlight bulb using a cloth
moistened with alcohol or thinner.
6-30
a
affected. Thoroughly
6. Install the bulb cover, and then
connect the coupler.
1
2
3
4
EC000105
5
6
7
8
9