Adjusting The Rear Shock Absorber Assembly - Yamaha TT-R TT250RN Owner's Manual

b
1. Compression damping adjusting screw
2. To increase the damping force
and thereby harden the damping,
turn the adjusting screw on each
fork leg in direction a. To
decrease the damping force and
thereby soften the damping, turn
the adjusting screw on each fork
leg in direction b.
20 clicks in direction b*
Minimum (soft)
11 clicks in direction b*
Standard
1 click in direction b*
Maximum (hard)
* With the adjusting screw fully turned in direction a
INSTRUMENT AND CONTROL FUNCTIONS
cC
Never attempt to turn an adjusting
mechanism beyond the maximum
or minimum settings.
1
3. Securely install the rubber caps.
a
cC
Be sure to install the rubber caps
to prevent dust, etc. from entering
the fork legs.
EC000015
Adjusting the rear shock
absorber assembly
This shock absorber is equipped with
a spring preload, rebound and com-
pression damping force adjuster.
ECA00034
3-11
1. Spring preload
should be left to a Yamaha deal-
er.
EAU03613
1
2
adjustment
3
4
5
6
7
8
9