Table of Contents
Advertisement
Shooting Still Images
Use the Shooting Mode when you take your still images. There are two methods of using the shutter
button, pressing the shutter in two stages (half-press) and pressing it all the way down at once (full-
press).
When you use half-press, you can confirm that your shot is in focus on the LCD Monitor. When you
want to capture the moment, full-press is convenient.
• For how to shoot with Zoom, see p.40
• For how to shoot Close-ups, see p.42
Check the Focus and Shoot
(Half-press)
Buttons used here
Turn the Mode Dial to
Compose your shot either by looking through
the Viewfinder or at the LCD Monitor.
• When the image confirmation time is set to OFF, it is not displayed. See p.100.
(Shooting Mode).
Chapter 1 / Section 2 Basic Shooting
Put the subject of your photo right in the
center and press the shutter button half-way.
F stop (aperture size) and shutter speed are displayed
in the bottom part of the screen, and the camera
focuses.
Once the shot is in focus, the exposure and white
balance are fixed and the crosshair in the center of
the LCD Monitor turns green, as does the auto-focus
lamp in the lower left of the Viewfinder. Check one of
these to make sure the subject is in focus.
Gently press the shutter button all the way.
The still image you have taken freezes for a moment
on the LCD Monitor and is recorded.
30
Advertisement
Table of Contents
