Table of Contents
Advertisement
/
If you select
Buttons used here
Press the
buttons to select a mode.
• In Auto Mode, if the subject has limited white area, White Balance may not adjust properly. In this kind of
situation add a white object to the composition.
• If you have set the camera to Daylight, Overcast, Tungsten or Fluorescent, the flash is set to Flash Off.
Chapter 1 / Section 3 Using Special Features for Improved Photography
/
/
/
Press the
White Balance settings are complete.
Press the
The Shooting Menu closes and the setting value is
displayed on the upper left of the screen.
This setting will be used for shooting until you change it.
50
button.
button.
Advertisement
Table of Contents
