Batteries (Cells) Not Acceptable - Ricoh Caplio R2 User Manual

• Nickel-Hydrogen Battery (available in stores)
This is economical because you can recharge and use
it over and over again. Use a charger (available in
stores) for charging.
The battery may be inert and consequently it may not supply power immediately after
it is purchased or left unused for more than a month. In such a case, recharge the
battery two or three times before use. The battery self-discharges with time even if
the camera is not used, so recharge it before use.
• AA-size Oxyride (oxy nickel hydroxide) dry cell (available in stores)
This cell has a longer life than an AA-size alkaline dry cell.
In addition to the batteries, you can use the AC Adapter (P.155).

Batteries (Cells) Not Acceptable

The camera does not accept the following batteries (cells):
Manganese dry cell (R6), Ni-Cd battery, CR-V3
Note
Indication of the number of images you can take
Battery Type
Rechargeable Battery (DB-50)
AA Alkaline Batteries (LR6)
• Based on CIPA standard (Temperature: 23 degrees Celsius, LCD on, 30 seconds between
shots, changing the zoom setting from telephoto to wide or wide to telephoto for each shot,
50% flash usage, turning the power off after each 10 shots).
• Number of shots of the AA Alkaline Batteries (LR6), it is using the AA Alkaline Batteries by
Matsushita Battery Industrial Co., Ltd.
• If you set the camera to the Power-Save or Synchro-Monitor mode, the number of shots
you can take will increase.
• The number of shots is for reference only. If the camera is used for long periods of time for
setting and playback, the shooting time (the number of shots) will decrease.
Reference
• For how to insert the Rechargeable Battery , see P.21.
• For how to use the AC Adapter, see P.155.
Number of Shots
Approx. 500
Approx. 200
17