Setting The Frame Rate - Ricoh Caplio R2 User Manual

Setting the Frame Rate

The number of shot frames per second (frame rate) in Movie Mode
can be selected from 30 and 15.
1.
Switch the Mode Selector to 3.
2.
Press the M button.
The shooting setting menu appears.
3.
Press the " button to select [FRAME RATE]. Then press the
O or $ button.
4.
Press the !" button to select [30
FPS] or [15 FPS].
5.
Press the O or # button.
This completes the frame rate setting.
6.
If the # button was pressed in
Step 5, press the M button.
The shooting setting menu disappears and
the LCD monitor displays the set values.
The set values are used for shooting until they are changed the next time.
Note
The movie recording time depends on the capacity of the SD memory card.
The recording time is as shown below.
15FPS 320 X 240
30FPS 320 X 240
15FPS 160 X 120
30FPS 160 X 120
90
IN 32MB 64MB
1 min 1 min 2 min
23 s 27 s 57 s
42 s 44 s 1 min
30 s
5 min 5 min 10 min
1 s 18 s 51 s
2 min 2 min 5 min
38 s 48 s 45 s
128MB 256MB 512MB
5 min 11 min 24 min
59 s 56 s 4 s
3 min 6 min 12 min
2 s 4 s 13 s
21 min 43 min 88 min
57 s 44 s 7 s
11 min 23 min 46 min
37 s 10 s 42 s
1GB
46 min
17 s
23 min
30 s
169 min
27 s
89 min
48 s