Specifications; Installation - JUKI MH-486-5 Instruction Manual

SPECIFICATIONS

Model
Sewing type
Sewing speed
Stitch length
Lift of presser foot
Top feed amount
Stroke of needle bar
Needle
Stitch length adjustment method
Safety stitch
Looper mechanism
Looper stroke
Lubrication system
Oil
Noise

. 1 .. INSTALLATION

2
1
3
4
Operator's.side
1-needle, double chainstitch, differential-feed, bottom and variable top feed machine
- Equivalent continuous emission sound pressure level (L
A-weighted value of 83.5 dB; (Includes K
GR2 at 4,500 sti/min.
- Sound power level (L
A-weighted value of 90.5 dB; (Includes K
at 4,500 sti/min.
6
4
5
Hinge.side.
MH-486-5
Max. 4,500 sti/min
1 to 5 mm
Hand lifter lever : 5.5 mm, Knee lifter : 7 mm
0 to 7 mm
33 mm
Schmets 149 × 7 Nm 70 to Nm 130 (Standard : Nm 80)
Dial type
Condensation stitch/reverse-feed stitch (by feed lever)
Inclined crank type
21.5 mm
Fully automatic lubrication
JUKI New Defrix Oil No.1
= 2.5 dB); according to ISO 10821- C.6.2 -ISO 11204
pA
);
WA
= 2.5 dB); according to ISO 10821- C.6.2 -ISO 3744 GR2
WA
1) Carry the sewing machine with two persons.
. (Caution). Do.not.hold.the.handwheel.
2) Do not put protruding articles such as the screwdriver and the like at the
location where the sewing machine is placed.
3) Attaching the hinge seats and the support rubbers of the machine head
Fix the hinge seats 1 supplied with the machine on the table using nails
2 .
4) Attaching the oil pan
Install oil pan 6 in such a way that it is supported at four corners of the
groove in the table.
At two corners on the operator's side, attach rubber cushion 3 to a protrud-
ing portion of the table by means of nails 4 . At two corners on the hinge
side, attach two head-rest cushions 5 by means of nails 4 . Then place oil
pan 6 on the cushions.
– 1 –
) at the workstation:
pA